Make sure your Skoog is connected and working properly.
IMPORTANT: when you start the software, visual
feedback indicators should be clear.
If they are not clear:
- Check that the Skoog is placed on a level surface (this is only
necessary when starting the software!)
- Check that the Skoog is not in contact with another object or
being handled.
If indicators are still not clear, perform a manual calibration by following these instructions:
- With the Skoog on a flat surface: place the palm of your hand firmly on the top (orange button), and rotate the pressure in a circular motion several times, then release the Skoog.
- While performing this action (a manual calibration), you should see the visual indicators activating in sequence with your movement.
.png "Activated Indicators")
|
When you release the Skoog, you should see that the visual indicators are clear - showing no activation. Repeat the manual calibration 3-4 times if necessary with increased pressure.
If the problem persists, shut down the software ('Skoogmusic' -> 'Quit Skoogmusic' [Mac] or 'File' -> 'Exit' [Windows]) and repeat the instructions on this page.
|
